Landing Gear

FINE MOLDS MILLENNIUM FALCON Part 2-LANDING GEAR (Chapter 2)


Landing gears have been painted up using Vallejo off-white with a small squirt of sky grey. Not too worried about being able to match that colour because the legs are going to be most heavily weathered.

Landing Gear
Landing Gear

I need to weather the landing gear up and wanted to go to town on this a bit as it’s probably going to be the most beaten up area.  I applied some stippled Sky Grey over the base colour (this was used in the mix so works well with it), focusing on the edges most.  I then applied some darker grey (Games Workshop) again focusing on the edges and when most of the paint was off the brush I scrubbed it around a bit more.

Picture below is the landing foot and baffle mainly completely painted.  Problem is this was quite time consuming, so doing 7 is going to take a while.

Landing Gear
Landing Gear

Knocked back some of the darker points with some Sky Grey, trying to create layers and variation in the process.  and used some MIG Rust Streaking fluid to add some rust and fluid leaks onto the surface.  Also used this partially as a wash into recesses and then used a dry brush to scrub it round.

Landing Gear
Landing Gear
Landing Gear
Landing Gear

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s